Z45X heavy body concealed stem gate valve

The Z45X heavy body concealed stem gate valve utilizes the deformation compensation effect generated by the overall sealing of the gate plate to achieve good sealing effect, overcoming the problems of poor sealing, water leakage, and rust of general gate valves, and saving installation space more effectively. It can be widely used as a regulator and shut-off device on fluid pipelines such as tap water, sewage, construction, petroleum, chemical, food, medicine, textiles, electricity, ships, metallurgy, energy systems, etc

Z45X Heavy body Concealed Rod Gate Valve Product Features:

1. Integral Coating: The gate adopts integral coating, which has good coverage performance, accurate geometric dimensions, good sealing performance, and long service life.

2. Good appearance: The valve body is coated with a smooth and delicate overall paint

3. Flat bottomed valve seat: The valve seat adopts the same flat bottomed design as the water pipe, which does not produce debris accumulation and has excellent sealing

4. Based on actual reports: The inner cavity is coated with toxin detection epoxy resin to prevent corrosion and rust. It can not only be used for drinking but also for sewage systems

5. Three "O" seals: The valve stem adopts three O-ring seals, which have low friction resistance, light switching, and no water leakage

Z45X Heavy Body Concealed Rod Gate Valve Main Technical Parameters:

Unit: mm

Nominal Pressure: 1.0-1.6MPa

Sealing Test: 1.1MPa, 1.76MPa

Nominal Diameter: 50-600mm

Working Temperature: 0-80 ℃

Applicable Media: Water, Oil, Gas, etc.

Flange Standard: GB/T 17241.6 GB/T9113

Test Standard: GB/T13927 API 59